Skip to main content

Rheem Hot Water Cylinder Prices in Wellington

Maxey Plumbing is an accredited Rheem Service Centre, supplying and installing the full Rheem range across Wellington City, the Hutt Valley and Porirua. Below are typical installed prices by cylinder type and size, with the exact figure confirmed on-site before any work starts.

What affects the price

Three things drive the final number, more than anything else:

  • Cylinder type. Mains pressure, low pressure, continuous flow gas and heat pump systems all sit at different price points, largely due to the unit cost itself.

  • Straight swap or conversion. Replacing like-for-like, same fuel type and similar size, is the cheapest job. Converting between electric, gas and heat pump usually adds pipework, wiring or venting.

  • Access and location. A cylinder in an easy-access cupboard costs less to install than one in a roof space or under-floor location in an older villa.

A quote given without seeing the site is always a guess. We confirm the real number on-site before starting any work.

Mains pressure cylinder prices

The most common installation for standard Wellington homes on town supply.

Size

Suits

Installed Price

135L

1 to 2 people

from [$X,XXX]

180L

2 to 4 people

from [$X,XXX]

250L

4 to 6 people

from [$X,XXX]

300L+

Large households

from [$X,XXX]

Low pressure cylinder prices

Common in older Wellington villas and homes without mains pressure plumbing throughout the house.

Size

Suits

Installed Price

135L

1 to 2 people

from [$X,XXX]

180L

2 to 4 people

from [$X,XXX]

250L

4 to 6 people

from [$X,XXX]

Rheem heat pump hot water prices

Higher unit cost, lower running cost over time. Suits households prioritising long-term energy savings.

Size

Suits

Installed Price

270L heat pump cylinder

3 to 5 people

from [$X,XXX]

315L heat pump cylinder

5+ people

from [$X,XXX]

What's included in these prices

Every installed price above includes the Rheem unit, removal of the old cylinder, standard fittings, and compliance with current Building Code and Rheem installation standards.

It does not include unusual access requirements, additional pipework for a conversion, or electrical or gas line upgrades, which we'll identify and quote on-site if they apply.

How a warranty repair works

Our streamlined process ensures your Rheem hot water system is repaired or replaced with minimal disruption to your day.

  1. Assessment. We check the fault on-site and confirm the cylinder's warranty status against its data plate.

  2. Claim. If it's a covered fault, we lodge the claim with Rheem directly and order the required parts.

  3. Repair. Once parts arrive, we complete the repair to Rheem's installation standard, which keeps any remaining warranty valid.

Not covered? If the fault sits outside warranty, we'll quote the repair as a standard job before doing any further work, so there's no surprise on the invoice.

Areas we Serve

    

Area

Coverage

Central Wellington: Wellington CBD, Te Aro

Same day

Western suburbs: Kelburn, Karori, Wadestown, Wilton

Same day

Southern suburbs: Island Bay, Newtown, Berhampore, Brooklyn

Same day

Eastern suburbs: Miramar, Seatoun, Strathmore Park, Kilbirnie, Lyall Bay, Hataitai

Same day

Lower Hutt: Petone, Lower Hutt Central, Naenae, Stokes Valley, Wainuiomata

Same day

Upper Hutt: Upper Hutt Central, Silverstream, Trentham

Same day

Porirua: Porirua Central, Titahi Bay, Cannons Creek, Whitby, Paremata, Plimmerton

Same day


Can’t see your suburb listed? Give us a call on 04 390 0135. We likely have a van in your area and can get a specialist to your door quickly.

Rheem Hot Water Solutions

Why get a quote from an accredited Rheem Service Centre

Installation by an accredited Service Centre keeps the manufacturer's warranty valid, gives direct access to genuine Rheem parts, and means the job is completed to Rheem's own standard rather than a general fit.

We've been installing hot water systems across the Wellington region for more than 20 years, and every plumber on the team is a registered Master Plumber.

What our customers say

Frequently Asked Questions

Why isn't there one flat price for a Rheem cylinder?

Cylinder type, size, access and whether it's a straight swap or a conversion all change the final cost. The ranges above are a genuine starting point, but the exact price is confirmed once we've seen the site.

Is the quote free? 

Yes. We'll assess your current setup and give you a fixed price before any work starts, with no obligation to proceed.

Does a heat pump cylinder cost more to run or less?

Less, over time. The unit cost is higher upfront, but running costs are typically lower than a standard electric mains pressure cylinder, which usually offsets the difference within a few years depending on household hot water use.

Do these prices include removing my old cylinder?

Yes, removal and disposal of the existing cylinder is included in the installed prices above.

Can I get finance or a payment plan for a replacement?

Speak to us when you call. Options vary depending on the job, and we'll let you know what's available at the time of quoting.

Rheem logo

Rheem Service Centre

As an Authorised Rheem Service Centre, we provide expert warranty repairs and high-efficiency cylinder replacements.

Mico Plumbing logo

Mico Plumbing

Proudly partnered with Mico to source the highest quality components for every Wellington installation.

Rinnai logo

Rinnai

Specialists in Rinnai gas continuous flow upgrades for endless hot water and space-saving solutions.

Master Plumbers logo

Master Plumbers

Every project is backed by the Master Plumbers Guarantee, giving you the ultimate peace of mind.

Think your cylinder might be covered?

Send us a photo of the data plate or give us a call, and we'll check your warranty status before booking anything in.